GLIDEPRO steel s200 SPECIFICATIONS


All of the S200 components are available in 10 colours from stock.

All profiles are fully colour co-ordinated to ensure the finished product has a high aesthetic value. In addition to supplying the full range of steel components and associated accessories required for the manufacture of sliding doors, we also offer the specialist tools required to fabricate the doors.


ITEM DESCRIPTION DIMENSIONS (MM) BOX QUANTITY

4mm Stile   The S200 4mm side stile provides the handle to the sliding door. L: 2750, W: 34, H: 29 14

The stile also protects the glass panel along the vertical edge.

Each door requires two side stiles.


8mm Stile   The S200 8mm side stile provides the handle to the sliding door. L: 2750, W: 34, H: 29 14

The stile also protects the MFC or MFD panel along the vertical edge.

Each door requires two side stiles


4mm Top and Bottom Rail  The S200 top/bottom rail fits on the top and the bottom of the sliding wardrobe door. L: 2440, W: 16 H: 16 20

This component is notched to accept the locator tabs on the bottom wheel/top guide assembly, which is then screwed to the side stile.

4mm option design for use with glass panels.

Each door up to 1220mm wide requires one rail. 


8mm Top and Bottom Rail  The S200 top/bottom rail fits on the top and the bottom of the sliding wardrobe door. L: 2440, W: 16 H: 16 20

This component is notched to accept the locator tabs on the bottom wheel/top guide assembly, which is then screwed to the side stile.

8mm option design for use with MFC or MDF panels.

Each door up to 1220mm wide requires one rail. 


Universal Connector H Bar   The S200 Universal connector H bar is used to create split panel doors. L: 2400, W: 24, H: 17 20

This universal component can be used with either glass or MFC panels.


Glass Packer Rail / Stile    These packers convert:  L: 2400, W: various, H: various 50

  • 10mm universal connector H bar to accept 4mm glass.

  • 8mm side stile to accept 4mm glass.


Top Track  The S200 top track is E shaped and attached to the top of the wardrobe framing assembly. L: 5000, W: 84, H: 44 1

There are two channels for the doors to run in. 

As the doors are bottom rolling, this component serves to stabilise the doors.

Universal and colour co-ordinated on the front facing edge, this component in is required for all S200 sliding wardrobe door installations.


Bottom Track  The S200 bottom track accepts the bottom rollers of the doors in the wardrobe framing assembly. L: 5000, W: 24, H: 17 1

There are two channels for the doors to run in. 

As the doors are bottom rolling, this component should be installed on a flat and level load bearing surface.

Universal and colour co-ordinated, this component is required for all S200 sliding wardrobe door installations.


Top Guide   The twin ball bearing top guide is constructed from a nickel plated metal carriage with an injection moulded PVC insert. N/A 100

The guides use ABEC 5 bearings and is rubber coated to roll smoothly within the top track channels.

Each door requires two guides.


Bottom Roller   The load bearing bottom roller is constructed from a nickel plated metal carriage with an injection moulded PVC insert. N/A 100

The wheel uses an ABEC 5 bearing and is chamfered to roll smoothly within the bottom track channels.

The S200 bottom roller also feature anti-jump tabs, which snap fit into the bottom track channel, preventing the doors from leaving the track.

All S200 bottom rollers are weight rated to 50kg.
       


Top Positioner This device simply creates a small amount of resistance against the top guide, in the position that the door is required to stop at. N/A 50

It is not a soft close mechanism. However, it eliminates the issue of doors rolling unintentionally, should the flooring not be perfectly level.
       



Brush Strip Brush strip is applied to the sides of the doors to minimise impact when the door and wall come into contact. N/A 2250mm

Dense pile self adhesive and available in grey only. 
       


Small Notching Tool Light to medium use tool for notching the rails of the S200 system. N/A 1


Large Notching Tool Medium to heavy use tool for notching the rails of the S200 system. N/A 1